Built-in high-efficiency filtration device, efficiently and quickly filter water, grease, rust and other impurities in the air. Fully guarantee the safe and environment friendly non-destructive cleaning of moulds.

Traditional cleaning methods use chemicals and hand tools, which are boring and inefficient. DSJet offers a non-abrasive and environment friendly method of cleaning moulds and products in a very short time, thus extend the intervals between preventive maintenance. In addition, it can be cleaned on-line.

Imported components are adopted in core parts of the equipment

--Blast dry ice particles：0.01-0.3mm

--Dry ice hopper capacity：9.1KG

--Air supply pressure range：2-9.9Bar

--Dry ice consumption range：0-0.6KG

--Compressed air flow：0.8-4㎡ /min

--Dimension：57x40x51cm

--Dry ice blasting pipe：3.7m

--Compressed air pipe：7m

Advantages of dry ice cleaning

1. High efficiency

Traditional cleaning requires disassembly, cooling, cleaning, and reassembly; dry ice cleaning need no disassemble; improve efficiency and protect the accuracy of the equipment.

2.Thorough cleaning

Traditional cleaning is difficult to clean the corners and crevices, high precision, complex structure of the mould; Dry ice can effectively clean corners, crevices, dead ends; no pollution, no residue.

3. Non-destructive

Traditional cleaning use polishing, soaking and other ways to potentially damage the mould, reduce precision and product quality; dry ice cleaning strength can be adjusted, does no damage to the mould and product, extend the service life of the mould, while improving product quality.

4. Dry

Traditional cleaning uses water, solvents, etc., resulting in conductivity and residue; dry ice cleaning is dry, thus can be in contact with electronic parts, non-conductive, non-corrosive, non-rust.

5. Environment protection

Traditional cleaning uses water, solvents, etc, which has an impact on human health and secondary pollution to the environment, and increases the treatment cost of secondary pollutants; Dry ice cleaning avoids secondary pollution, is non-toxic, tasteless and residue-free, and CO2 is a recyclable and renewable resource, which is environmentally friendly.

Clean the mold, no water, no chemicals, and no secondary waste.