DSJet Built-in high-efficiency filter device, high-efficient and rapid air filtration of water, Grease, Rust and other impurities.

The core components of the equipment are imported components

Weight：55KG

External dimensions：700*470*1000

Dry ice ejector tube：3M

Compressed air:5M

Use the medium：Liquid CO2(Compressed air)

CO2CO2 working pressure：55bar~65bar

Compressed air nitrogen: 0.5 bar~6bar

Spray particles of dry ice and snow：40um~190um

CO2 flow：0.05KG/min~0.42KG/min

Control system：PLC+Touch screen

Adjustable range of dry ice and snow：10mm~30mm

Voltage：220V  50HZ

Advantages of dry ice cleaning

1. High efficiency

Traditional cleaning requires disassembly, cooling, cleaning, and reassembly; dry ice cleaning need no disassemble; improve efficiency and protect the accuracy of the equipment.

2. Thorough cleaning

Traditional cleaning is difficult to clean the corners and crevices, high precision, complex structure of the mould; Dry ice can effectively clean corners, crevices, dead ends; no pollution, no residue.

3. Non-destructive

Traditional cleaning use polishing, soaking and other ways to potentially damage the mould, reduce precision and product quality; dry ice cleaning strength can be adjusted, does no damage to the mould and product, extend the service life of the mould, while improving product quality.

4. Dry

Traditional cleaning uses water, solvents, etc., resulting in conductivity and residue; dry ice cleaning is dry, thus can be in contact with electronic parts, non-conductive, non-corrosive, non-rust.

5. Environment protection

Traditional cleaning uses water, solvents, etc., which has an impact on human health and secondary pollution to the environment, and increases the treatment cost of secondary pollutants; Dry ice cleaning avoids secondary pollution, is non-toxic, tasteless and residue-free, and CO2 is a recyclable and renewable resource, which is environmentally friendly.

Clean the mold, no water, no chemicals, and no secondary waste.